Publicidad
Idiomas disponibles
Idiomas disponibles
DO NOT USE AN EXTENSION CORD UNLESS IT
IS ABSOLUTELY NECESSARY. Using the wrong,
damaged or improperly wired extension cord could
result in the risk of fire and electrical shock. If an
extension cord must be used, plug the charger into a
properly wired 16 gauge or larger extension cord with
pins that are the same number, size and shape as the
pins on the charger. Make sure that the extension cord
is in good electrical condition.
CHARGER IS RATED FOR 115 VOLTS AC ONLY
(model 48-59-2818) or 230 VOLTS AC ONLY (model
48-59-2810). Charger must be plugged into an
appropriate receptacle. Refer to label on charger.
USE ONLY RECOMMENDED ATTACHMENTS. Use
of an attachment not recommended or sold by the
battery charger or battery pack manufacturer may
result in a risk of fire, electric shock or personal injury.
UNPLUG CHARGER when not in use. Remove
battery packs from unplugged chargers.
TO REDUCE THE RISK OF ELECTRIC SHOCK,
always unplug charger before cleaning or maintenance.
Use a Ground Fault Circuit Interrupter (GFCI) to reduce
shock hazards.
DO NOT BURN OR INCINERATE BATTERY PACKS.
Battery packs may explode, causing personal injury
or damage. Toxic fumes and materials are created
when battery packs are burned.
DO NOT CRUSH, DROP, OR DAMAGE battery pack.
Do not use a battery pack or charger that has received
a sharp blow, been dropped, run over, or damaged in
any way (e.g., pierced with a nail, hit with a hammer,
stepped on).
DO NOT DISASSEMBLE. Incorrect reassembly may
result in the risk of electric shock, fire or exposure
to battery chemicals. If battery pack or charger is
damaged, take it to an Enerpac Authorized Service
Center.
SYMBOLOGY
Properly Recycle
Batteries
Double Insulated
Volts Direct
Current
Volts Alternating
Current
SPECIFICATIONS
Li-Ion Battery
(Model 48-11-2830)
Volts DC
28
Note: Battery pack and charger manufactured by Milwaukee Electric Tool Corporation.
Battery Charger
(Model 48-59-2818)
Input
Input
Volts AC
Amps
115
2.1
BATTERY CHEMICALS CAUSE SERIOUS BURNS.
Never allow contact with skin, eyes, or mouth. If a
damaged battery pack leaks battery chemicals, use
rubber or neoprene gloves to dispose of it. If skin is
exposed to battery fluids, wash with soap and water
and rinse with vinegar. If eyes are exposed to battery
chemicals, immediately flush with water for 20 minutes
and seek medical attention. Remove and dispose of
contaminated clothing.
DO NOT SHORT CIRCUIT. A battery pack will short
circuit if a metal object makes a connection between
the positive and negative contacts on the battery
pack. Do not place a battery pack near anything that
may cause a short circuit, such as coins, keys or nails
in your pocket. A short circuited battery pack may
cause fire and personal injury.
STORE YOUR BATTERY PACK AND CHARGER in
a cool, dry place. Do not store battery pack where
temperatures may exceed 120°F [50°C] such as in
direct sunlight, a vehicle or metal building during the
summer. Charger will charge the battery when the
battery's internal temperature is between 14°F [-10°C]
and 150°F [65°C]. When the battery temperature is
outside that range, charging will not occur.
4.0 LEGAL INFORMATION
The battery pack and charger described in this
document are manufactured by Milwaukee Electric
Tool Corporation. "V28™", "V™-technology" and
the Milwaukee Electric Tool logo are trademarks
and intellectual property of Milwaukee Electric Tool
Corporation.
The capitalized and italicized "MILWAUKEE" text
used in various places throughout this document
denotes products and/or components manufactured
by Milwaukee Electric Tool Corporation.
Underwriters
Laboratories, Inc.,
US and Canada
Hertz
Amps
Output
Output
Volts DC
Amps
18-28
3.5
2
Battery Charger
(Model 48-59-2810)
Input
Input
Volts AC
Amps
230
1.1
Output
Output
Volts DC
Amps
18-28
3.5
Publicidad
