Waeco PerfectView CAM26W Instrucciones De Montaje Y Uso página 31

_RV-26.book Seite 31 Montag, 7. Mai 2007 2:28 14
PerfectView CAM26W
Caution!
a
The cables may not be exposed for long periods to solvents such
as benzine, as the solvents can damage the cable.
Please observe the following instructions:
Wherever possible lay cables inside the vehicle, as they are better
protected inside than outside the vehicle.
If you do need to lay a cable outside the vehicle, ensure that it is well
secured (use additional cable ties, insulating tape, etc.).
To prevent damage to the cables, when laying them ensure that there is
sufficient distance to hot or moving vehicle components (exhaust pipes,
drive shafts, light systems, fans, heater etc.). Use corrugated piping or
other protective materials to protect against mechanical wear.
Wrap the insulating tape supplied around the plug connections of the
connecting cables and every connection on a cable (including inside
the vehicle) to protect from penetrating water (fig. 0 B, page 6).
When laying electric connections, ensure that
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp edged ducts without protection (fig. 3,
page 4)
Attach the cables securely in the vehicles to prevent tripping hazards.
Use cable binders, insulating tape or glue the cables in place.
Protect every through-hole made in the bodywork against water pene-
tration, e.g. by using a cable with a sealant and by spraying the cable and
the the cable sleeve with sealant.
Note!
I
Do not start sealing the through-holes until all installation work has
been finished for the camera, and the required cable lengths have
been established.
All manuals and user guides at all-guides.com
Information on the electrical connections
31