Studio Settings - Blackmagic Studio Camera Manual Del Usuario

Camera Settings
13

Studio Settings

To adjust the display settings for the LCD, press the MENU button and select the headphones icon.
Camera Number
If you want your Studio Camera to receive tally signals from an ATEM switcher, you'll need to set the
camera number on your camera. This ensures the switcher sends the tally signal to the correct camera.
The camera number can be set to a value of 1-99. Default setting is 1.
Reference Source
Used to select the genlock source. The Studio Camera can lock to program SDI input or external genlock
source. If using an external genlock source, be aware that changing that source will most likely cause a
glitch as the camera locks to the new source.
Reference Timing
Allows you to manually adjust the reference timing on a line or pixel basis.
Headset Level
Move the volume slider left or right to increase or decrease audio monitoring levels. The default setting
Studio settings.
is 50%.
Headset Mic Level
Move the volume slider left or right to increase or decrease audio microphone input levels. The default
setting is 50%.
Program Mix
Changes the balance of camera sound to talkback sound. The headphones will output audio following
what is displayed on the LCD. For instance, if you are in camera view, camera audio is heard. And if you
are in program view, program audio is heard. The default setting is 0%.