Using Camera Control - Blackmagic Studio Camera Manual Del Usuario

Using ATEM Software Control
20
Click on the settings icon to select
the Aux output for camera control.
Each camera controller displays the channel status so you
know which camera is on air. Use the color wheels to adjust
each YRGB channel's lift, gamma and gain settings.
When applying Paste to all, a warning message will appear
asking you to confirm your action. This is so you don't
accidentally paste new settings to any unlocked cameras
that are currently on air.

Using Camera Control

Launch ATEM Software Control and click on the Camera button located at the bottom of the software
window. You'll see a row of labeled camera controllers containing tools to adjust and refine each
camera's image. The controllers are easy to use. Simply click the buttons using your mouse, or click
and drag to adjust.
Camera Control Selection
The button row at the top of the camera control page lets you select the camera number you would like
to control. If you have more cameras that fit onto the window size, or you are running the color corrector
window, then you can use these buttons to select between which camera you would like to control. If you
are using an Aux output for monitoring your camera control, pushing these buttons to change the camera
to control will also send that camera's video output to the Aux output setup in the switcher preferences.
Channel Status
The channel status at the top of each camera controller displays the camera label, On Air indicator and
lock button. Press the lock button to lock all the controls for a specific camera. When on air, the channel
status illuminates red and displays the On Air alert.
Color Wheel
The color wheel is a powerful feature of the DaVinci Resolve color corrector and used to make color
adjustments to each YRGB channel's lift, gamma and gain settings. You can select which setting to adjust
by clicking on the three selection buttons above the color wheel.
Master Wheel
Use the master wheel below the color wheel to make contrast adjustments to all YRGB channels at once,
or luminance only for each lift, gamma or gain setting.
Reset Buttons
The reset button near the top right of each camera controller lets you easily choose color correction
settings to reset, copy or paste. Each color wheel also has its own reset button. Press to restore a setting
to its default state, or copy/paste a setting. Locked controllers are not affected by the Paste feature.
The master reset button on the top right corner of the color corrector panel lets you reset lift, gamma and
gain color wheels plus Contrast, Hue, Saturation and Lum Mix settings. You can paste color correction
settings to camera controllers individually, or all cameras at once for a unified look. Iris, focus, coarse and
pedestal settings are not affected by the Paste feature. When applying Paste to all, a warning message
will appear asking you to confirm your action. This is so you don't accidentally paste new settings to any
unlocked cameras that are currently on air.