Christie LX41 Manual Del Usuario página 18

3.4 Port Settings (Continued)
Item
SNMP Port
Port open
Trap address
Download MIB file
Network Bridge Port
Port Number
Click the [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection from
Network Restart on the main menu. (&34)
LX41/LW41 User Manual - Network Guide
Configures the SNMP port.
Click the [Enable] check box to use SNMP.
Configures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings. The maximum length of host or domain name is up
to 255 characters.
Downloads a MIB file from the projector.
Configures the Bridge port number.
Input the port number.
Except for 9715, 9716, 9719, 9720, 5900, 5500, 4352
between 1024 and 65535 can be set up. It is set to 9717 as
the default setting.
16
Description
020-000508-01 Rev. 1 (06-2012)
3. Web Control