Christie LX41 Manual Del Usuario página 50

7.4 Command Control via the Network (Continued)
When the authentication setting is enabled, the following settings are required.
(&25)
7) Click the [Security Settings] on the main menu.
8) Click the [Network Control] and enter the desired authentication password.
* See NOTE.
9) Click the [Apply] button to save the settings.
NOTE
• The Authentication Password will be the same for Network Control
Port1 (Port: 23), Network Control Port2 (Port: 9715), PJLink™ Port (Port:
4352), My Image Port (Port: 9716) and Messenger Port (Port: 9719).
• The new configuration settings are activated after restarting the network
connection. When the configuration settings are changed, you must restart
the network connection. You can restart the network connection from Network
Restart on the main menu. (&34)
LX41/LW41 User Manual - Network Guide
48
7. Other Functions
020-000508-01 Rev. 1 (06-2012)