Adjusting The Bowden Cable; Adjusting The Carburettor; Maintenance Intervals - Deltafox DG-PLM 4213 4in1 Traducción Del Manual De Instrucciones Original

GB

Adjusting the Bowden cable

If the Bowden cables go out of adjust-
ment, you can adjust them.
1. Loosen the small locking nut
(38).
2. - Turn the adjusting nut (39)
counter-clockwise:
The Bowden cable shortens.
- Turn the adjusting nut (39)
clockwise:
The Bowden cable extends.
3. Re-tighten the small locking nut
(38).
Maintenance Work
(See "cleaning and mainte-
nance")
Check and tighten screws, nuts
and bolts
Check the engine oil level/petrol
level and refill with engine oil/
petrol if required
Clean operating elements / the
area around the silencer
Clean the finger protection
Change the engine oil
Replace the air filter
Clean/adjust the spark plug
Replace the spark plug
Check the silencer and spark
b
catcher
Clean the air cooling system
Replace more often if there is a high level of dust or heavy dirt
a
b
See Briggs & Stratton instruction manual
102
Before


b
a
a,b

Adjusting the Carburettor

The carburettor has been preset in the
factory for optimum performance. If read-
justments are required, have the adjust-
ments made by a specialist workshop.

Maintenance Intervals

Regularly carry out the maintenance work
listed in the "maintenance intervals" table.
Regular maintenance prolongs the life of
the equipment. It also gives optimum cut-
ting performance and avoids accidents.
After
After 1
5 Hrs.
Work


st
After After
8 Hrs. 50 Hrs.






Annual




