Deltafox DG-PLM 4213 4in1 Traducción Del Manual De Instrucciones Original página 94

GB
by the manufacturer. The use of parts
from other manufacturers may result
in injuries and will result in immediate
invalidation of the guarantee.
Handling:
• Do not run the combustion engine in
enclosed spaces, in which dangerous
carbon monoxide can collect.
• Mow only in daylight or with good arti-
ficial lighting. An unlit working area can
result in accidents.
• If possible, avoid using the equipment
on wet grass.
• Always ensure secure positioning, par-
ticularly on hillsides, landfills, ditches or
dykes. This will give you better control
of the equipment in unexpected situa-
tions.
- Always work across the slope,
never upwards or downwards.
- Take particular care when changing
the direction of travel on the slope.
- Do not mow on excessively steep
slopes (max. 10°).
• Run the equipment only at walking
speed.
• Take particular care when turning the
equipment around or pulling it towards
you.
• Stop the cutting tool if the equipment
has to be tipped up for transportation
over a surface other than grass and
when moving the equipment from and
to the surface to be mown.
• Do not use the equipment with dam-
aged safety equipment or guards or
with no safety equipment attached, e.g.
impact protection and/or grass catch-
ers. This ensures that the equipment
remains safe.
• Do not change the engine regulator
setting and do not over-rev it. This may
damage the equipment.
94
• Before starting, the engine, disengage
all cutting tools and drives.
• Start or operate the start switch with
care and in accordance with the manu-
facturer's instructions. Ensure sufficient
space between feet and the cutting tool.
Risk of injury.
• When starting or activating the engine,
do not tip the equipment unless the
equipment has to be lifted for this proce-
dure. In this case, tip the equipment only
as far as is absolutely necessary and lift
only the side that is away from the user.
• Do not start the engine when standing
in front of the ejection channel.
• Switch on the engine in accordance
with the instructions and only if your feet
are a safe distance away from the cut-
ting tools.
• Do not place hands or feet under rotat-
ing parts. Always keep away from the
ejection opening. A moment of careless-
ness when using the equipment may
result in serious injury.
• Do not leave or carry the equipment
when the engine is running.
• Switch off the engine, take out the spark
plug connector and ensure that all mov-
ing parts are still:
- Before releasing blockages or remov-
ing obstructions in the ejection channel;
- Before checking, cleaning or working
on the equipment;
- If a foreign body is struck. Look for
damage to the equipment and carry
out the necessary repairs before
restarting and working with the equip-
ment;
- If the equipment starts to vibrate unu-
sually strongly, an immediate check is
required.
• Switch off the engine, take out the spark
plug connector and ensure that all mov-
ing parts are still: