B Operating Procedures; B.2 Buttons; B.4 Prior To Start-Up - Kärcher CR 114 Manual Del Usuario

English

B Operating procedures

Operating controls:
a Front panel
b EMERGENCY-STOP button
c "Start" button
d "Stop" button
e "Confirm" button
f "Correction" button
g Buttons for entering code
h Text display
j Lock
k Cover
b
B1
Operating Instructions
B.1 Operating controls
b
d
c
a

B.2 Buttons

When the following buttons are pressed a beep can be
heard which confirms that they have been pressed properly:
– CORRECTION button
– CONFIRMATION button
– programme selection buttons.
B.3 Emergency shutdown
Press the red EMERGENCY-STOP button.
The washing unit is brought to an immediate standstill.
Observe the information contained in the operating instruc-
tions for the washing unit in order to restart the system.

B.4 Prior to start-up

Using mounting kit, floor stand (option), the code terminal
can be stored in the wash bay when the unit is closed. To
put the unit into initial operation, the code terminal must then
a
be set up at its intended location.
Tilt the stand onto its casters and push it to where it will
be sited.
c
Place the hole in the stand over peg (a) on the anti-
overturning device.
Fit disc (b) over the peg.
Push spring pin (c) or padlock (not supplied) through the
peg so that the stand is prevented from overturning.
Ensure that the connecting cable is routed properly.
k j f e
5.959-363 F 00499 (01/00)
CR 114
h
g