English
B Operating procedures
Please enter the
first figure
of the code.
Enter code
Programme no. 5
Please wait ...
Please wait.
Code number entered
wrongly!
B3
Operating Instructions
B.5.2 Enter code
When a vehicle wash is purchased, the ticket issuing unit at
the cash till prints out a ticket with the code. The customer
takes the ticket with him to the washing unit. There, he
enters the code at the code terminal in order to start the
vehicle wash:
The code terminal prompts the user to enter the code.
Enter six-figure code, the hyphen after the first 3 figures
makes the code more easily readable and is inserted
automatically by the code terminal.
With every key press on the "Correction" button, the
furthest figure on the right can be deleted. In this way,
erroneous input can be rectified.
Immediately after complete entry of the code, the vehicle
wash starts.
As soon as the washing unit is ready for the next vehicle,
the card reader displays the opening text blocks again.
B.5.3 Code-matching to the set-up code
The set-up code
serves to decode the code in the code terminal.
is normally code-matched by Customer Service at the
initial start-up of ticket issuing unit and code terminal.
is generated by the ticket issuing unit (see operating
instructions of the ticket issuing unit, Chapter 2.13. and
XX) and entered in the code terminal.
Procedure:
the code terminal must display the start images,
press button "Correction" 5 times in succession,
press button "Confirm" once,
enter first figure of the set-up code
the code terminal prompts for the entry of the remaining
5 figures,
enter remaining 5 figures,
when the valid code has been entered, the message
opposite is shown on the display
when a non-valid set-up code has been entered,
the message opposite is shown on the display
CR 114
5.959-363 F 00499 (01/00)