To Replace Charcoal Filter - Dacor DHD30M700WS Instrucciones Para Instalación

Installation
Secure the bottom of the duct with 2 - 4 x 8 mm screws.

To Replace Charcoal Filter

NOTE
The maximum BTUs if you use carbon filter is 46,000. If you use the hood with the carbon filters on and it does
not decrease the BTUs the engine can fail or generate an unsafe act.
1. Cover the grille that covers the blower motor with
the charcoal filter so that the slots on the filter
correspond to the pins on the sides of the motor
grille.
2. Turn the charcoal filter clockwise to lock it.
3. Repeat steps 1-2 on the other filter.
Charcoal filters are not included with the hood.
They must be ordered from authorized Dacor dealer.
Order the needed kit specifying your hood model and width size.
16 ENGLISH
C
A
B
A. Upper Vent Cover C. Screws
B. Lower Vent Cover D. Bracket
D
C
C
A
B
A. Charcoal Filter
B. Pins
C. Blower Motor