Getting Started; Fitting The Batteries - Elcometer 508 Guia Del Usuario

3 GETTING STARTED

3.1 FITTING THE BATTERIES

1 Peel the protective rubber boot forward to expose the battery
compartment cover at the rear of the gauge.
2 Rotate the battery compartment cover anti-clockwise to the
'unlock' position.
3 Identify correct polarity and fit 2 x AA alkaline dry batteries.
4 Replace battery compartment cover and rotate clockwise to the
'lock' position.
5 Replace protective rubber boot taking care not to damage the
front panel of the display.
The battery symbol at the bottom right hand side of the display
indicates the battery condition.
3.2 SWITCHING THE GAUGE ON AND OFF
To Switch On: Press
software fitted (e.g. 1.04.03 IDENT) followed by the MIN and MAX
range in MPa.
To Switch Off: Press
switch off when the button is released.
Note: When the digital pressure gauge is switched off, "OFF" is permanently
displayed.
Automatic Switch Off: The gauge has a timer function and can be set
to switch off automatically after 1, 5 or 20 minutes of inactivity. The
gauge default setting is NONE.
1 Press
MENU
2 Press
MENU
5 MIN, 20 MIN.
3 Press
3
R
. The gauge displays the version of
and hold for a second. The gauge will
until TIMER is displayed followed by
or to toggle between the options; NONE, 1 MIN,
MAX
to select the setting required.
to select.
www.elcometer.com