Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
14. INSTALL THE INTERIOR BLOWER (P8D BLOWER MODEL ONLY)
The blower must be installed to the insert using (8) no. 8 x 3/8" screws. Remove the cover from the blower assembly. Remove
the impellers by pulling them out gently (see pictures below).
HD0021
Install (4) no. 8 x 3/8" screws into the location as shown in the picture
beside. Do not tighten screws down fully, leave a 1/8" gap. Hang blower
unit onto insert inner top (screws through the large part of the keyhole).
Slide the blower to its position (screws in the small part of the keyhole).
Tighten the (4) screws.
Secure the blower by installing 4 more no. 8 x 3/8" screws into the locations
shown in the picture beside. Reinstall impellers and cove.
All manuals and user guides at all-guides.com
- 9 -
HD0022
HD0045
HD0081
Publicidad
Tabla de contenido
