Electrical Connection - Franke FHM 604 4E Instrucciones Para El Uso E Instalacion

Electrical connection

The FRANKE cooking hob is not supplied with a power cable.
Connecting the power cable to the terminals
The power cable must be suitable for the type of electric connection used (see wiring
chart below - fig. 3). To connect the power cable open the terminal box by unscrewing the
cover screw and use a screwdriver to lever it off the two fastening tongues.
Connecting the power cable to the system
If the hob is permanently connected to the power supply, install a circuit breaker with a
contact opening which permits complete disconnection in conditions of overvoltage
category III
The supply cable must also be positioned so that it is never in contact with temperatures
above 50°C.
Before carrying out connections ensure that:
- the limiting valve and the house system can support the appliance load
(see specifications data plate);
- the power system is supplied with efficient earthing in conformance with legal
standards and provisions;
- the multi-polar switch can be easily accessed from the installed hob.
N.B.:do not use reductions, adapters or shunts as these can lead to overheating and
burning.
Caution: if the hob is to be fitted above a built in oven, the electric connections of the
hob and those of the oven must be carried out separaelt, both for safety and to facilitate
oven removal.
14
All manuals and user guides at all-guides.com
Fig. 3