Honeywell CL202PEU Manual De Instrucciones página 6

USE & OPERATION (CONTINUED)
COOLER LOCATION
Make sure to position the air cooler correctly before you set up and start using the product. Please
refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide.
WATER & ICE COMPARTMENT
CAUTION:
Unplug the unit from the electrical power outlet before emptying or
refilling the water tank.
Open the Water Fill Door & Ice Compartment Lid, which is located
on the top of the unit. The Water Level Indicator is located at the
front of the unit. Refill the water tank when water level is low. Slowly
add water, until water level indicator marks "MAX". Overfilling can
cause leaking and water accumulation on louvers. Check the water
level in the tank before running the COOL function. Make sure
that the water in the tank is above the minimum water level mark.
Running the unit in COOL mode with inadequate water may cause
pump failure.
Note: The water capacity refers to the total volume of water that can
be contained within the air cooler water tank and water distribution
Water Fill Door & Ice
system. The water capacity in the tank at the "Max." indicator level
Compartment Lid
may be lower than the actual water capacity of the air cooler.
WARNING: Do not fill water tank with dirty water or salt water. This
can damage the unit and Honeycomb media.
EN 5