Kit Assembly - Metra 95-3031B Guia De Inicio Rapido

1. Slide the radio brackets into the radio
bezel. (Figure A)
2. Slide the radio between the radio
brackets, then secure using screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Slide the radio into the dash, then
secure using the factory screws.
5. Reassemble the dash in reverse
order of disassembly to complete the
installation.

KIT ASSEMBLY

(Figure A) (Figure B)
REV. 7/15/2021 INST95-3031B
3