DVD BASIC OPERATION
IMPORTANT NOTES:
• A symbol will appear at the upper right corner on the TV screen during operation if you try to
access a function that is not available on the disc.
• Some discs may take a few seconds to load.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position
it with the printed title side facing up, align it with the guides and place it in its proper position.
• It is important that you read the manual that accompanies the DVD disc as there are features
that are on this DVD player that cannot be used with certain DVDs. There are also extra
features that are different for each DVD disc, so they are not explained in this owner' s manual.
PLAYBACK OF A DVD
1. Press "TV/AV/DVD" button on the unit or press the TV/DVD direct key on the remote handset
to turn ON DVD.
2. Press the OPEN/CLOSE ( ) button to open the disc tray. Insert a disc with the label side facing
up on the disc tray.
3. Press the OPEN/CLOSE ( ) button to close the disc tray. After loading, the menu screen of the
DVD should appear. Use the Navigation ( ,
PLAY/ENTER button to select it; playback will start immediately.
4. To stop playback, press the STOP ( ) button. Because the unit will remember where you
stopped, simply press the PLAY/ENTER button to resume playback where you left off. If the
STOP ( ) button is pressed twice, the unit will stop completely.
NOTES:
• If a MENU appears on the TV screen, press the Navigation ( ,
desired option/item, then press the PLAY/ENTER button. Please make sure to refer to the disc' s
jacket or case for additional information.
• Resuming playback may not work on all discs.
CHAPTER SEARCH
Use this feature to directly go to a specific chapter.
Press the DISPLAY button twice, followed by the Number buttons (i.e. for number 12, press "1",
"2") to directly go to a chapter; playback will start immediately.
DVD MENU
Press the MENU button, and the Main Menu of the disc will appear. Use the Navigation ( ,
buttons to select the desired option, and then press the PLAY/ENTER button. This is not available
on all discs.
20
W1320PTVD MIT IC +MTK1389R12197-20.p65
20-21
, ) buttons o select the desired option and the
,
, ) buttons to select the
,
,
DVD BASIC OPERATION(CONTINUED)
SKIP
Press the SKIP (
) button to advance the DVD to the beginning of the next chapter.
Press the SKIP (
) button to move the DVD to the beginning of the previous chapters.
SEARCH
During playback, press either the SEARCH (
forward or backward at double (x2) speed to locate a specific section. Repeatedly press these
buttons and the speed will increase to x4, x8, x16 and resume normal playback.
The DVD will move forward or backward at high speed until the PLAY/ENTER button is pressed
again; normal playback will resume at that point.
DISPLAY
While playing a DVD, press the DISPLAY button once to view the title, elapsed title time and
remaining title time. Press a second time to view the chapter, elapsed chapter time and remaining
chapter time. Press a third time to view the layer setting ("L0" for layer 0, "L1" for layer 1). Press
a fourth time to turn the display off.
PAUSE/STOP(
/
)
Press the PAUSE/STOP (
) button once to pause the picture. Press the PLAY/ENTER button
/
again to resume normal playback.
Press the PAUSE/STOP (
) button twice to stop the playback.Press the PLAY/ENTER button
/
again to start playback from the beginning.
SUBTITLE
Press the SUBTITLE button to change the subtitle language .
Note: Number of subtitle available depends on the DVD disc.
LANGUAGE(AUDIO)
Press LANGUAGE button to change the Audio channel. This function is applicable for DVD and CD
audio but with different effects.
ZOOM
This function is applicable for DVD. user can enlarge a static picture or a moving picture by
, )
pressing the ZOOM button. there are 3 levels of zooming(2x,3x and 4x) and they can be achieved
one by one through subseqient key press on the zoom key.
2008/3/31, 下午 02:25
) button or SEARCH (
) button to move the DVD
21