Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING THE TELEVISION
Connect your TV aerial to the aerial input socket located on the back of the TV.
Push the Main Power Switch, Power Indicator will be illuminated. After few seconds the TV
screen will light up and will show interference on the screen. The TV will require tuning into the
available TV stations in your area.
Pre-setting the TV stations into the Memory
(Note: Preset tuning can only be carried out in TV Mode)
Press MENU " " three times on the remote handset ,the
TV screen will show TUNE mode as FIG.1
AUTO SEARCH
1. Press the "
-" to select the AUTO SEARCH mode as
shown in FIG. 2
2. Press the "
+" to start the automatic scanning process
starting from VHF to UHF
and the TV stations will automatic store into the memory as
shown in FIG. 3
•
When scanning is completed, the set will tune to lowest
programme and show lowest programme number on the
screen.
•
To stop auto search function to press MENU " " button.
• To exit the TUNE mode, press the MENU " " button.
MANUAL SEARCH
1. Press the "
+/-" button to select the PROGRAMME.
then press the "
+/-" button to select the desired
Programme number .
2. Press the "
+/-" button to select the MANUAL
SEARCH mode and press the "
+/-" button
to start the search up the band. The TV screen will show
the tuning and when the first station received is located,
the tuning will stop and stored automatically . Then press
the "
+/-" button to recommence seek search to
the next TV station. as shown in FIG.4,FIG.5.
3. Press the MENU " " button to exit the manual.
10
W1320PTVD MIT IC +MTK1389R12197-20.p65
10-11
ONLY FOR PAL- I
OPERATING THE TELEVISION
Connect your TV aerial to the aerial input socket located on the back of the TV.
Push the Main Power Switch, Power Indicator will be illuminated. After few seconds the TV
screen will light up and will show interference on the screen. The TV will require tuning into the
available TV stations in your area.
TUNE
C SYSTEM
PAL
S SYSTEM
I
PROGRAM
1
Pre-setting the TV stations into the Memory
AUTO SEARCH
(Note: Preset tuning can only be carried out in TV Mode)
MANUAL SEARCH
SELECT
A DJ UST
EXIT
FIG .1
TUNE
C SYSTEM
PAL
AUTO SEARCH
S SYSTEM
I
PROGRAM
1
1. Press the "
AUTO SEARCH
MANUAL SEARCH
SELECT
2. Press the "
A DJ UST
EXIT
FIG .2
AUTO SEARCH
•
PROGRAM
1
BAND
VHF L
•
• To exit the TUNE mode, press the MENU " " button.
FIG .3
MANUAL SEARCH
TUNE
C SYSTEM
PAL
1. Press the "
S SYSTEM
I
PROGRAM
1
AUTO SEARCH
MANUAL SEARCH
SELECT
2. Press the "
A DJ UST
EXIT
FIG .4
MANUAL SEARCH
PROGRAM
1
BAND
VHF L
3. Press the MENU " " button to exit the manual.
FIG .5
Press MENU " " three times on the remote handset ,the
TV screen will show TUNE mode as FIG.1
-" to select the AUTO SEARCH mode as
shown in FIG. 2
+" to start the automatic scanning process
starting from VHF to UHF
and the TV stations will automatic store into the memory as
shown in FIG. 3
When scanning is completed, the set will tune to lowest
programme and show lowest programme number on the
screen.
To stop auto search function to press MENU " " button.
+/-" button to select the PROGRAMME.
then press the "
+/-" button to select the desired
Programme number .
+/-" button to select the MANUAL
SEARCH mode and press the "
+/-" button
to start the search up the band. The TV screen will show
the tuning and when the first station received is located,
the tuning will stop and stored automatically . Then press
the "
+/-" button to recommence seek search to
the next TV station. as shown in FIG.4,FIG.5.
2008/3/31, 下午 02:25
ONLY FOR PAL- BG
TUNE
C SYSTEM
PAL
S SYSTEM
BG
PROGRAM
1
AUTO SEARCH
MANUAL SEARCH
SELECT
A DJ UST
EXIT
FIG .1
TUNE
C SYSTEM
PAL
S SYSTEM
BG
PROGRAM
1
AUTO SEARCH
MANUAL SEARCH
SELECT
A DJ UST
EXIT
FIG .2
AUTO SEARCH
PROGRAM
1
BAND
VHF L
FIG .3
TUNE
C SYSTEM
PAL
S SYSTEM
BG
PROGRAM
1
AUTO SEARCH
MANUAL SEARCH
SELECT
A DJ UST
EXIT
FIG .4
MANUAL SEARCH
PROGRAM
1
BAND
VHF L
FIG .5
11
Publicidad
Tabla de contenido
