Disney W1320PTVD Guia Del Usuario página 7

C. SYSTEM
1. Press the " +/-" button to select the C SYSTEM then press "
desired colour system PAL,NTSC,AUTO.
S SYSTEM
1. If the unit is the single sound system,it is fixed and cannot be adjusted.
Notes:
1. If ghost / noisy stations have been stored when using the AUTO SEARCH method, these can
be removed from the channel list by entering the SKIP Mode shown in the TUNE menu. Press the
" +/-" and change the OFF state to ON. Press the MENU " " button to return to normal viewing.
The unwanted station will be removed from the channel list when you change TV channels.
The SKIPPED station can be restored by re entering the TUNE menu and changing the SKIP ON
status to OFF.
2. To exit the TUNE mode, press MENU " " button.
PICTURE
1. Press the MENU " ",TV screen will show PICTURE mode.
2. Press the " +/-" to select the CONTRAST /BRIGHTNESS
/ COLOUR / SHARPNESS as show in FIG. 6.
3. Press the " +/-" to the desired level, The level can be
adjust from 0 ~ 99.
• To exit the PICTURE Mode, press the MENU " " three times.
SET UP LANGUAGE
1. Press the MENU " " button twice to select the SETUP,as s
shown in figure 7.
2. Press the " +/-" to select the LANGUAGE,then press the
" +/-" to select the desired language ENGLISH,
FRANCAISE, ESPANOL, PORTUGUES,NEDERLANDS,
ITALIANO, DEUTSCH.
BLUE BACK
Press the " +/-" button to select the BLUE BACK and press the "
to adjust the blue Back-ground on or off.
EXCHANGE
After storing TV stations by AUTO SEARCH or MANUAL SEARCH, the position of each TV
programme can be changed by the following method:
1. In the existing watching station press the "
press the numaric buttons to Key in the desired programme no.which you want to move this
station to, then press the " +"to confirm.
2. To exit the SETUP MODE, press the MENU " " button 2 times.
12
W1320PTVD MIT IC +MTK1389R12197-20.p65 12-13
+/-" button to change the
PICTURE
CONTRAST 50
BRIGHTNESS 50
COLOUR 50
SHARPNESS 50
SELECT
A DJ UST
EXIT
FIG .6
SETUP
LANGUAGE ENGLISH
BLUE BACK ON
EXCHANGE 1 - - -
SELECT
A DJ UST
EXIT
FIG .7
+/-" button
-" button to select the EXCHANGE then
CHANNEL SELECT AND VOLUME CONTROL
1) Press " +/-" buttons to select TV station.
0
Press " -", the programme no. will
appear on the top right corner and
change from a higher to lower number.
2) Press " +/-" button to adjust sound level.
TV/AV/DVD Mode Button
• If video/audio input socket are in use, press TV/AV/DVD Mode button in the TV set, "AV1"
OR "AV2" will display on the top right corner of the screen.
• Press TV/AV/DVD button to turn on DVD in the TV set. When DVD mode is selected please
wait, the screen will be dark as it will take a few seconds to show the "DVD "at the top right
corner of the screen.
TV AV 1
2008/3/31, 下午 02:25
255
Press " +", the programme no. will change
from a lower no. to higher number.
VOLUME
| | | | 06
AV 2 DVD
13