Safety Instructions; Relating Specifically To; The Equipment - MeisterCraft MTS 600 B Instrucciones De Uso E Indicaciones De Seguridad

5461550-Tischkreis-man.qxd
are connected and properly used.
Use of these devices can reduce dust
related hazards.
Power tool use and care
• Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
• Disconnect the plug from the
power source before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
• Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to
operate the power tool. Power tools
are dangerous in the hands of
untrained users.
• Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
27.03.2009 14:42 Uhr
All manuals and user guides at all-guides.com
• Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
Service
• Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
6 – Safety instructions
pull out the mains plug.
• Do not use the saw to cut up firewood.
moving saw blade.
• The saw is fitted with a safety
switch (11) to prevent it restarting
after a voltage drop.
• Use a cable drum only in the unrolled
condition!
• Ensure good lighting.
• Operators must be at least 18 years
old. Trainees must be at least
16 years old and under supervision.
• Keep the workplace free of wood
waste and other objects.
Seite 65

relating specifically to

the equipment

WARNING! When carrying out
setting and maintenance work
CARE! There is a risk of injury to
hands and fingers from the
65