Publicidad
Idiomas disponibles
Idiomas disponibles
5461550-Tischkreis-man.qxd
• Remove dust and chips from all the
guides (parallel and mitre fence).
• Clean the outside of the casing with a
slightly moist cloth and allow it to dry
well.
Repair
Attempts at repair by non-
approved specialists may result
in injury!
Fault tracing and repair
• The machine will not start?
– Check the power socket and
associated house fuse. Check
the supply voltage is correct
(see "Technical data").
– Have carbon brushes checked by
approved specialists.
• The motor runs irregularly, stops,
or starts with difficulty?
– Have the carbon brushes exchanged
by authorised specialists.
• The cut surfaces become
discoloured?
– The feed rate is too high. Saw more
sensitively and feed more slowly!
– The saw teeth are blunt or broken.
Replace the saw blade!
– The saw blade is gummed up.
Demount and clean saw blade!
• The cut surfaces are untidy or tear
out?
– The saw teeth are blunt or broken.
Replace the saw blade!
• The workpiece jams while sawing?
– Readjust riving knife!
– The parallel stop tilts or moves.
Lock parallel stop setting!
70
27.03.2009 14:42 Uhr
All manuals and user guides at all-guides.com
Seite 70
• The machine gets hot?
– Chip extractor is not working properly.
– Chip build-up. Empty chip extractor!
• The saw is not cutting?
– The saw blade has been fitted the
wrong way round.
• The machine is vibrating violently?
– The saw blade is out of balance.
Replace the saw blade!
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the
household waste! They are to be
collected separately, in
accordance with the
2001/96/EC directive for
the disposal of electrical
and electronic waste, and
sent for proper and
environmentally-friendly
recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all the
information and parts ready to hand.
• MeisterCRAFT devices are to a large
extent maintenancefree, a damp cloth
being sufficient to clean the casing.
Do not drop electrical machines in
Publicidad
Capítulos
