Brixton BQ-6305 Manual De Usuario página 9

• The (gas pressure) regulator should comply with the current version of
the EN12864 standard and national regulations.
!!!WARNING!!!
1. Never try to insert objects into the opening of the gas tap. This can
damage the gas tap causing it to start leaking. Leaking gas can cause
fire, explosions, serious personal injuries and even death.
2. Do not use this barbecue before performing a leak test.
3. If you have found a gas leak, turn off the gas cylinder immediately.
Dismount the gas pressure regulator from the gas cylinder. Place the
gas cylinder in a cool, well ventilated area. Contact your dealer or gas
supplier for further assistance.
4. If you can't stop the gas leak contact the fire department or supplier of
the gas cylinder.
!!!DANGER!!!
1. NEVER store an extra gas cylinder underneath or close to the barbecue
or in confined spaces..
2. NEVER fill the gas cylinder over 80%. Overfilling a gas cylinder is
dangerous, because excess gas can leak out of the safety valve. Gas
can escape from the safety valve causing a fire.
3. The connection openings of the gas cylinder must be provided with
protective covers.
4. In case you discover a gas leak in the extra gas cylinder, immediately
keep your distance and call the fire department.
VERY IMPORTANT: DISCONNECT THE GAS CYLINDER WHEN
THE BARBECUE IS NOT IN USE.
DISCONNECTING THE GAS CYLINDER:
• Turn off all knobs.
• Completely close the gas tap of the gas cylinder (turn clockwise until
the knob stops).
• Remove the pressure regulator from the gas tap by turning the quick-
connect nut counter-clockwise
• Replace the protective cover on the gas tap of the gas cylinder.
LEAK TEST
GENERAL
All gas connections of the grill are tested for leaks in the factory prior to
shipment. Nevertheless, when mounting the device, it must be checked
entirely for gas leaks, because of possible damages during transportation
or due to exposure to extreme pressure. Regularly check the device for
leakage, or check whether you can smell any gas.
BEFORE CHECKING
• Make sure to remove all packing materials from the barbecue, including
the straps keeping the burner in its place.
• Do not smoke while checking for leakage.
• Never check for leakage with open fire.
• Prepare a solution of water and soap of one part detergent and one part
water. Do not use a spray can, brush or cloth to apply the solution to the
connections. Make sure the gas cylinder is full before the first leak test.
• Checking for leaks must be performed outdoors on a well-ventilated
spot, away from ignition source such as gas or electrical devices and
combustible materials.
• Keep the grill away from open fire and/or sparks during the test.
Instruction manual EN
9