Technoline WS 6502 Manual Del Usuario página 9

SETTING UP THE WEATHER STATION
The weather station will bleep once when batteries are installed or the AC/DC adapter is plugged in.
1. The double digits will flash showing the level of your location above sea level will be seen at the
bottom right hand corner of the display. Press"+/C/F" button (4) or "-/RCC" button (8) to change
your unit location level above sea level. The sea level units are in meters (1 meter equals
approximately 3.28 feet). Contact your local weather bureau or authorities for more information if
required.
Press "HISTORY" button (5) to confirm location of the unit above sea level.
2.
Press "+/C/F" button (4) or "-/RCC" button (8) to change the current weather situation of your
3.
location. See figure 3 below for the weather pattern that best resembles your immediate area.
Figure 3
Press "HISTORY" Button (5) to confirm weather pattern.
4.
INTERPRETING THE WEATHER FORECAST SYMBOLS
1. The weather station requires at least 24 hours to acclimatise to local weather conditions. The
weather station will process and analyse the weather patterns of the past 24 hours in order to
determine the future weather. The predicted weather forecast may not accurately reflect the actual
weather for your immediate area till 24 hours have elapsed.
2. The weather station will display the symbols (see figure 3) to indicate the predicated weather
forecast for the next 12 to 24 hours for an area within a radius of approximately 30-50 km.
Note
1. The weather forecast is only for reference and only for domestic use. Do NOT rely on the weather
station for a forecast for any serious matter including but not limited to : personal health, any
business or financial decisions, and/or agricultural planning. And certainly NOT for life and death
situations.
2. The weather forecast does not display the current weather. It displays future weather situation.
ADJUSTING THE WEATHER STATION
Press "HISTORY" button (5) for 3 seconds until a bleep is heard.
1.
Press "+/C/F" button (4) or "-/RCC" button (8) to select between atmospheric pressure units of
2.
pascal (hPa) to inch of mercury (inHg)
Press "HISTORY" button (5) to confirm.
3.
Press "+/C/F" button (4) or "-/RCC" button (8) to select between absolute and relative atmospheric
4.
pressure.
Press "HISTORY" button (5) to confirm.
5.
Press "+/C/F" button (4) or "-/RCC" button (8) to change your unit location level above sea level.
6.
Press "HISTORY" button (5) to confirm unit location level above sea level.
7.
Press "+/C/F" button (4) or "-/RCC" button (8) to change the current weather situation for your
8.
location. See figure 3 above for the weather pattern that best resembles your immediate area.
2