Getting Started; Main Unit - Technoline WS 6730 Manual Del Usuario

3. Outdoor Thermo Sensor
D1: Transmission Indication LED
D2: Outdoor Temperature display
D3: Outdoor Humidity display
D4: Wall Mount Hole
D5: "C/F" Button

4. Getting Started:

4.1 Main Unit:

Slide open main unit battery compartment cover [C2]

Insert 2 x AA batteries observing polarity [ "+" and " –" marks]

Replace main unit battery compartment cover [C2]

Use a pin to press the RESET [B13] button on the rear of the main unit, the main

unit is now ready for use
4.2 Outdoor Thermo Sensor
Batteries compartment (D8) of thermo sensor is locating behind the back cover,

unscrews the batteries cover to open.
Insert 2 x AAA batteries observing polarity [ "+" and "–" marks]

5. Installation
5.1 Main Unit
The main unit can be placed onto any flat surface (C3), or wall mounted by the
hanging hole (C1) at the back of the unit.
D6: Channel Select Switch
D7: Key does not exist anymore
D8: Battery Compartment
D9: Stand
3