Avoid placing the clock near interference sources/metal frames such as computer or TV sets.
The clock loses its time information when the battery is removed.
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
Set it up in away direct sunlight and Rain
Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning
agents may scratch plastic parts and corrode electronic circuits
The manufacturer will not take responsible for incorrect forecasting from this unit.
13. Specifications
Indoor Data:
Temperature range:
Temperature Units Measured:
Humidity Range:
Air Pressure Range:
Air Pressure Units Measured:
Weather Forecast:
Outdoor Data:
Transmission distance:
(open area)
Temperature range:
Mount:
Main Unit Dimensions:
Thermo Sensor Dimensions:
Battery Requirements:
Base Station [indoor]:
Sensors [outdoor]:
0 to 50°C [+32 to +122°F]
°C or °F [switchable]
20% to 99%
850 – 1050 hPa
mb/hPa, inHg & mmHG [switchable]
5 icons [sunny, slightly cloudy, cloudy, rainy
& snow]
30m @ 433MHz
-20°C to 50°C [-4 to +122°F]
wall / table
W90 x h165 x d55 mm
W55 x h111 x d16 mm
2 x AA batteries
2 x AAA batteries
10