How To Use - Remington HC331 Manual Del Usuario

ENGLISH
BEFORE STARTING THE CUT
1.
Inspect the clipper making sure that it is free from hair and dirt.
2.
Seat the person so that their head is approximately at your eye level.
3.
Before cutting, always comb the hair so it is tangle free and dry.
TO ATTACH A COMB
Hold the comb with its teeth upward.
Slide it onto and along the clipper blade until the front of the comb firmly sits against the
clipper blade (SETTING 1).
NOTE: Please make sure that the comb locking mechanism is not activated (the switch on the
back of the clipper should be in the "down" position) when attaching the comb.
TO REMOVE THE COMB
Holding the clipper with the blades facing away from you, firmly push the comb upward and
away from the blades.
NOTE: Please make sure that the comb locking mechanism is deactivated (the switch on the back
of the clipper should be in the "down" position) when removing the comb.
ADJUSTING THE TRIM LENGTH
The comb attachment can be adjusted to give you 4 different trim lengths. Move the comb up
or down to the preferred setting and slide the switch on the back of the product up to lock the
comb. To unlock it please slide the button down.
Setting
Setting 0: without attachment
INSTRUCTIONS FOR HAIR CUTTING
NOTE: For even cutting, allow the comb attachment/blade to cut its way through the
hair. Do not force it through quickly. If you are cutting for the first time, start with the
highest setting.
2
080714_REM_IFU_HC330_22L.indd GB_2 080714_REM_IFU_HC330_22L.indd GB_2
All manuals and user guides at all-guides.com

HOW TO USE

Length
0 1 mm
1 6 mm
2 9 mm
3 12 mm
4 15 mm
comb
05.11.2008 11:48:17 Uhr 05.11.2008 11:48:17 Uhr