Wire Sizes; Unpacking And Checking Contents; Tools Needed; Unpacking - RIDGID SS1650 1 Manual Del Usuario

Motor Specifications and Electrical Requirements (continued)

Wire Sizes

NOTE: Make sure the proper extension
cord is used and is in good condition.
The use of any extension cord will cause
some loss of power. To keep this to a min-
imum and to prevent overheating and
motor burn-out, use the table shown to
determine the minimum wire size
(A.W.G.) extension cord.

Unpacking and Checking Contents

Tools Needed

Combination Square

Unpacking

WARNING
: To reduce the risk of
injury, from unexpected starting or
electrical shock, do not plug the
power cord into a power source outlet
during unpacking and assembly. This
cord must remain unplugged when-
ever you are working on the saw.
Your scroll saw is fully assembled and
shipped complete in one box.
IMPORTANT: Never lift this saw by the
arm which holds the blade or damage will
occur to your saw.
Separate all parts from packaging materi-
als and check each item with illustration
and "List of Loose Parts". Make certain all
items are accounted for before discarding
any packaging material.
NOTE: If you are missing any part, call 1-
800-4-RIDGID or E-mail us at info@ridg-
idwoodworking.com to get the missing
part. Sometimes small parts can get lost
in packaging material. DO NOT throw
away any packaging until saw is put
together. Check packaging for missing
parts before contacting RIDGID. A com-
plete parts list (Repair Parts) is at the end
of the manual. Use the list to identify the
number of the missing part.
Use only 3-wire extension cords which have
3-prong grounding type plugs and 3-pole
receptacles which accept the tools plug.
Extension
Cord Length
0-25 Ft.
26-50 Ft.
Medium Standard and
Phillips Screwdriver

List of Loose Parts

Item Description
A 16" Scroll Saw
(Completely Assembled) ............... 1
B Owner's Manual............................. 1
C Loose Parts Bag containing:
Blade ........................................1
NOTE: Hardware to mount this scroll saw
to a bench is not supplied. See mounting
instructions for recommended hardware
size.
A
Lift
Here
B
8
Gauge
(A.W.G.)
110-120V
18
16
Qty.
Do Not Lift Saw
By This Arm
Lift Here
C