3 - SPECIFICATIONS
3.7 Compressor parts
Pos. Description
1
Protective hood
2
Name plate
3
Pressure regulator
4
Lubrication regulating screw
5
Operating air pressure gauge
6
Connection for not lubricated air
7
Air filter
8
Condensation discharge valve
9
Lubricator
10
Fittings and couplings
11
General compressed air tap
12
Air exhaust tap
13
Pilot valve/unloader
14
Safety valve
15
Tank pressure gauge
16
Air exhaust tap
17
Compressor head block
18
Cooling flywheel
19
Oil filler cap
20
Copper hose
21
Compressor air filter
22
Transmission belts
23
Belt stretcher locking nuts
24
Belt tensioning nut
25
Tank air filter
26
Sight glass
27
Air tank
28
Reel pin
29
Third hitch point joint
30
Lift arms
31
Tractor hydraulic power lift
32
Splined shaft
33
Cardan joint
Function
Protects the operator from the moving parts
CE name plate with compressor identification details
Regulates the pressure of the outflowing air
Regulates the oil drop interval
Indicates the pressure of the outflowing air
To be used for cleaning the suction filter, etc.
Retains all impurities contained in the outflowing air
Allows to discharge the accumulated condensation from the air filter unit
Used to spray oil into the outflowing air so as to lubricate the
pneumatic tools
Connect the pneumatic tools
When closed, it allows to perform the maintenance operations
When open, it allows to let the compressed air out of the tank
Keeps the pressure in the air tank at the correct level
Comes into action when the pilot valve/unloader is faulty
Indicates the pressure in the air tank
Removes deposits and residual air in the air tank
Fills the tank with compressed air
For cooling the compressor block
Used to add or change oil in the compressor
Air hose connecting the compressor head block with the air tank
Filters the inflowing air of the compressor
Transmit motion to the compressor
Maintain the correct tension of the power transmission belts
Allows the correct belt tensioning
Used to drain the oil from the compressor
Indicates the oil level in the compressor
Stores the air required for the operations
Keeps the hose reel in the correct position
Keeps the compressor in the right position
Used to secure the compressor to the hydraulic lift of the tractor
Fitted with two forks for lifting the compressor
Receives motion from the tractor
Connection with the tractor that transmits motion to the compressor
Photo Ref.
A
A
B
B
B
B
B
B
B
B
C
C
C
B
C
D
F
F
F
F
F
F
G
G
H
H
I
I
L
L
L
L
L
23 - 72