Kinderkraft XPEDITION Manual De Uso página 60

5.5 How to dismantle the child safety seat (ISOFIX fixing system + Top tether)
• To release Top tether upper fixing belt (3), press the button on the buckle (fig. A.11) and
slacken the fixing belt. When the belt is sufficiently loose, detach Top tether hook from the
fixing point. After completing the above-stated actions, wrap Top tether upper fixing belt.
• Press the release key (15) on both ISOFIX fasteners. Fasteners will be released, and ISOFIX
indicator color (15) will turn from green to red. Retract ISOFIX fasteners with the use of a
sliding lever (16), slide the base of the child safety seat back in by pressing fasteners towards
the safety seat so that they hide in the base. Do the same on both sides of the child safety
seat.
6. How to hide 5-point safety belts and take care of child safety seat.
6.0 How to hide 5-point safety belts
• Slacken 5-point safety belts (8) by pressing the button (9) and pulling the belts out of the
backrest to reach their maximum length.
• Set the headrest top height with the use of headrest adjustment handle (6).
• Unfasten the buckle (4) to release safety belts and slide them to the side (fig. B.1),
• Detach the fabric cover of the crotch buckle which is Velcro-fastened (fig. B.2), next pull the
crotch belt buckle (4) through the bottom of the seat cover.
• The backrest fabric fastens with a press stud. Undo it before you place belts under the
covering (fig. B.3).
• In the next step place safety belts with shoulder covers under the backrest fabric on the
plastic shell of the child safety seat (fig. B.4).
• Under the seat you can find a soft-foam liner (fig. B.5). Remove it, there is a hard foamed
polystyrene filling underneath (fig. B.6). Remove the aforesaid filling, and place the secured
5-point belt buckle there. A correct position of the belts is presented in the figure (B.7).
• After you have placed the buckle in the cavity, put the soft-foam liner back in (fig. B.8).
• NOTE! Remember to tighten 5-point safety belts with an adjustment strap until safety belts
lie flat behind the child safety seat backrest fabric.
• Draw the cover over the seat and backrest by securing the cover with press studs (fig. B.9).
6.1 How to detach/attach the cover
• Before hiding 5-point safety belts, remove shoulder pads (fig. C.1)
• Dismantling the backrest and seat cover: detach four press studs which attach the cover to
rear part of the child safety seat backrest (fig. C.2, C.3). Remove the cover from side guards
by sliding the fabric off (fig. C.4).
• Gently pull the fabric from both sides of the seat outside the safety seat, slip the cover off
the front part of the seat. Remember to pull out the fabric around the belt adjustment button.
Such fabric can now be removed from the child safety seat, pull it through the headrest.
• Detaching the cover from headrest: Grab the upper part of the cover behind the headrest
height adjustment button and gently slip the fabric off the upper part of the headrest (fig. C.6,
C.7). When the fabric from the upper part is removed, start detaching the cover on sides of
the headrest.
60