Iso Mount Radio Provision With Pocket - Metra 99-5815 Instrucciones De Instalación

DIN radio provision with pocket
2. Slide the DIN cage into the radio
housing and secure by bending
the metal locking tabs outward.
(Figure A)
3. Slide the aftermarket radio into
the cage until it snaps in place.
(Figure B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-5815
(Figure A)
(Figure B)

ISO mount radio provision with pocket

1. (a) For the Ford Edge 2007-2010,
Expedition 2007-2012, Fusion
2006-2009, and the Mustang
2005-2009 attach the included
spacers to the back of the radio
housing mounting tabs.
(Figure 1A)
Note: Use the screws supplied
with this kit to mount the radio
housing in the vehicles that require
the spacers.
(b) For the Ford Freestar 2004-
2007, Monterey 2004-2007,
Focus 2005-2007, and the F
Series Super Duty 2005-2012,
slide the included brackets onto
the sides of the radio housings
pocket from the back of the
housing forward. (Figure 1B)
If your vehicle is not listed above
move to Step 2.
7
(Figure 1A)
(Figure 1B)