Metra 99-5825 Instrucciones De Instalación

INSTALLATION INSTRUCTIONS FOR PART 99-5825
Ford Fiesta 2011-Up
99-5825S, 99-5825B
KIT FEATURES
• ISO DIN radio provision
• Driver information circuits and buttons
• Painted Silver or Matte Black to match factory finish
KIT COMPONENTS
• A) Radio Housing • B) Radio ISO Brackets • C) (6) #8 x 3/8" Phillips truss head screws
A B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-5524-NAV Ford interface 2011-up
Antenna Adapter: • 40-EU10 multi-app adapter
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket Wrench • Cutting Tool
METRA. The World's best kits.
APPLICATIONS
C
1-800-221-0932
™
Dash Disassembly
– Ford Fiesta 2011-Up ............................................ 2
Kit Assembly
– ISO DIN radio provision......................................... 3
NOTE: This kit comes pre-programmed for vehicles
equipped with SYNC. It will not operate properly in vehicles
equipped without SYNC unless it is programmed.
Programming for vehicles without SYNC:
1. Turn on the ignition.
2. Press and hold the kit's menu button for
ten seconds.
3. Release the menu button and test the kit's buttons
for proper operation.
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in
beforereconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Table of Contents