Dynascan DB-59 Manual Del Usuario página 32

Default: TO.
TO: After receiving a matching signal, scanning will resume if no operation is performed
within 5 seconds.
CO: Scanning will stop when receive a matching signal, and will resume 3 seconds after
the signal disappears.
SE: Scanning will stop when a matching signal is received.
Menu 18: Setting ID transmission code --- PTT-ID:
Function: Selective ID transmission mode.
Options: OFF/BOT/EOT/BOTH.
Default: OFF.
Menu 19: ID delay transmission --- PTT-LT:
Function: ID code delay transmission.
Options: 0-50.
Default: 5.
Menu 20: Channel display --- MDF:
Function: Selects the channel display mode.
Options: CH/NAME.
Default: CH.
Menu 21: Busy channel lockout --- BCL:
Function: This function disable the transmission when the channel is busy so as not to
interfere with the communication of other users. If the selected channel is busy, when
pressing [PTT] the radio will alarm and cannot transmit.
Options: ON/OFF.
Default: OFF.
Menu 22: Auto keypad lock --- AUTO LOCK:
Function: This function locks the keypad automatically after 15 seconds.
Options: ON/OFF.
Default: OFF.
Note:
- Manual lock: In standby, press and hold [#] key for more than 2 seconds to lock
and unlock the keypad.
Menu 23: Frequency offset direction --- SFT-D:
Function: Setting frequency offset direction.
Options: OFF/+/-.
Default: OFF.
English - 12 -