Fm Radio; Ctcss Table - Dynascan DB-59 Manual Del Usuario

1) Set automatic dialling through menu 18 or programming software, menu 16 or
programming software to select signaling coding group.
2) Press [PTT] to transmit, it will send out the previously edited DTMF signaling
encoding group.

15.3.- FM RADIO:

Short press [PF2] key is defined as FM radio; the FM radio frequency range is 65-108
MHz.
1) Turn on the radio:
In standby mode, short press [PF2] key, the display shows the frequency of
radio.
2) Automatic station tuning:
Press [*SCAN] to automatically search for FM radio stations, the search will
automatically stop when receiving FM radio station.
Note:
- For 4-keys model, press [MENU] to access FM radio function to automatically
search FM radio stations.
3) Tuning the FM radio stations:
In FM radio mode, press the keypad to select the FM radio station, or you can
input FM radio frequency manually through the number keys to select the radio
FM station.
4) Turn off the radio:
Press [PF2] key.
When you use the FM radio, the current channel still in standby, once receiving
the signal, the equipment switches to transceiver´s mode. When the signal
disappears, after 5 seconds the transceiver automatically returns to FM radio
mode. Press [PTT] to transmit, when the transmission is finished, the radio will
return to FM radio mode after 5 seconds.

16.- CTCSS TABLE:

English - 15 -