JVC KD-BT1 Manual De Instrucciones página 41

WMA:
– Bit rate: 5 kbps — 320 kbps
– Sampling frequency: 8 kHz — 48 kHz
– Channel: Mono/stereo
AAC:
– Bit rate: 16 kbps — 320 kbps
– Sampling frequency: 48 kHz, 44.1 kHz
– Channel: 1 ch/2 ch
WAV:
– Bit rate: Linear PCM at 705 kbps and 1 411 kbps
– Sampling frequency: 44.1 kHz
– Channel: 1 ch/2 ch
• This unit can play back MP3 files recorded in VBR
(variable bit rate).
• The maximum number of characters for folder and
file names is 25 characters; 128 characters for MP3/
WMA/WAV Tag.
• This unit can recognize a total of 50 000 files and
5 000 folders (999 files per folder). However, the
display can shows until 9 999 folders/files.
• The unit cannot recognize a USB mass storage class
device whose rating is other than 5 V and does not
exceed 500 mA.
• This unit may not recognized a USB device connected
through a USB card reader.
• This unit may not play back files in a USB device
properly when using a USB extension cord.
• This unit cannot assure proper functions or supply
power to all types of USB devices.
Bluetooth operations
General
• While driving, do not perform complicated operation
such as dialing the numbers, using phone book, read
text message, etc.
When you perform these operations, stop your car in
a safe place.
• Some Bluetooth devices may not be connected to
this unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth devices.
• Connecting condition may vary depending on the
circumstances around you.
All manuals and user guides at all-guides.com
• When the unit is turned off, the device is
Icons for phone types
These icons indicate the
phone type of number
entries in the Phonebook.
Warning messages for Bluetooth operations
Connection
Error
Error
Device not
found
Loading...
Please
Wait...
disconnected.
These icons indicate the
type of connected phone/
audio devices:
: Cellular phone
: Household phone
: Office
: General
: Other than above
The device is registered but the
connection has failed. Use "Connect"
to connect the device again. (See page
15.)
Try the operation again. If "Error"
appears again, check if the device
supports the function you have tried.
No available Bluetooth device is
detected by "Search."
The unit is updating the phone book,
call history (redial, missed, received),
and/or text message.
The unit is preparing to use the
Bluetooth function. If the message does
not disappear, turn off and turn on the
unit, then connect the device again (or
reset the unit).
Continued on the next page
REFERENCES
: Phone only
: Phone/audio
: Audio only
: Unknown
41