Spare And Wearing Parts; 24 8.4 Maintenance By The User; 24 8.4.1 Maintenance Agreement; 24 8.4.2 Maintenance Schedule - Beissbarth TESLA VLH 2140 Manual Original

en 36 | VLH 2140 | Faults
8.3

Spare and wearing parts

Item/Component
Square mount with rubber element
Door stop
Hydraulic fluid as per ISO 32 specification
8.4 Maintenance by the user
The maintenance work described below must be
performed by the user.
!
Prior to maintenance, the platform must always be
disconnected from the mains and secured to prevent
unauthorized use.
!
If components are damaged or worn or do not
function properly:
Inform Beissbarth customer service or an authorized
service agent.
8.4.1 Maintenance agreement
i
Regular upkeep of the lifting platform is essential to
ensure a long service life and permanent readiness
for use. We recommend concluding a maintenance
agreement with Beissbarth customer service or an
authorized service agent.
8.4.2 Maintenance schedule
Daily:
Component Action
Stickers Visual inspection:
All stickers must be affixed and clearly
legible.
Mounts Visual inspection:
Mounts must be clean, free from
grease and intact.
Support arms Visual inspection:
Support arms must not be damaged.
Check locking.
Lifting carriages Visual inspection:
Lifting carriages must not be
damaged.
Wiring Visual inspection:
No damage to insulation.
Hydraulic system Visual inspection:
No escape of fluid.
Locking pawls Functional test:
Locking pawls must extend and
retract properly.
|
1 692 826 073 2017-03-29
Monthly:
Part number Component
1 692 871 564
Exposed surfaces and
edges
From Beissbarth
franchised dealer
Exposed surfaces and
edges
Synchronizing cables
and pulleys
Limit switch
Every 3 months:
Component
Support arms
Mounts
Every 6 months:
Component
Hydraulic unit
Sliders at lifting
carriage
Shear connector
Every 3 years:
Component
Hydraulic fluid
Action
Cleaning:
Clean all contaminated surfaces and
apply preservative agent if applicable.
Paintwork care:
Sand down paintwork blemishes with
sand paper (grain size 120) and touch
up with the appropriate RAL shade.
Visual inspection:
Components must not be damaged or
worn.
Typical examples of cable damage:
Individual wire breaks, kinking,
constriction, flattening, looping,
tangling.
Pay particular attention to cables in
the area of the threaded end pieces.
Functional test:
Raise the switch rod.
Action
Lubricate the shafts (lithium grease).
Lubricate the spindles (lithium
grease). Make sure the mounts cannot
be completely screwed out.
Action
Check fluid level in tank:
Dipstick must be immersed in fluid
(max. 5 mm) when lifting platform is
fully lowered.
Top up with specified hydraulic fluid if
necessary.
Lubricate the inner surfaces of
the lifting columns (multi-purpose
grease).
Check tightening torque.
Re-tighten to specified torque if
necessary.
Action
Renew hydraulic fluid completely
Beissbarth GmbH