Battery Replacement - Affinity AFB Manual Del Usuario

BATTERY REPLACEMENT

1 Disconnect the battery
charger board. Remove the strap.
Replace the battery and secure the
strap,
BATTERY HANDLING WARNINGS:
•
Dispose of used batteries promptly.
•
Keep away from children.
•
Do not disassemble.
•
Do not dispose of in fire.
LIGHT ENGINE / LAMP ASSEMBLY REPLACEMENT
Open the unit and disconnect all
1
connectors from the charger board,
unplug and remove battery.
Unscrew
screws
Light engine
bracket
CHARGER BOARD REPLACEMENT
Unplug and remove battery (Pag 5,
1
Step 1-2) and plastic cover from
housing.
AFFINITY
2
from the
NiCad battery
2
Light engine/Lamp assembly
2
Main charger
board screws
Main charger
board
Plastic cover
screws
Plastic cover
®
LIFE SAFETY SOLUTIONS
TEL: 800-705-SERV (7378)
techsupport-emergency@acuitybrands.com
MAINTENANCE
Reconnect the new battery to the
charger board.
Remove screws from the plastic
cover and main charge board
and take them out. Carefully
unplug connector from lamp
assembly.
Connectors
Disconnect all connectors on the
charger board.
www.lithonia.com
Re-assemble unit.
3
LiFepo4 battery
Battery Strap
Remove mounting screws from the
3
bracket and remove the light
engine assembly. Carefully unplug
connectors from the light engine
and reconnect the connectors to
the new light engine. Reinstall light
engine assembly and ensure that
the lamp wires are not pinched.
Remove all the screws from charger
3
board, replace the new charger
board, connect the connectors in the
same orientation to the new charger
board.
© 2020, Acuity Brand Lighting,Inc.
Page 5
912-00020-001
Rev. D, 3/2021
All Rights Reserved.