Transport/ Packaging/ Storage; Removing The Packaging And Handling The Chiller - omi CHW 09 Manual De Uso Y Mantenimiento

710.1760.00.01-00
MODELS: CHW 162 to CHW 1252; CHO 162 to CHO 242; CHG 140 to CHG 365
MODELS
CHW 162, 192, 242, 292 / CHG 180,
240
CHO 162, 192, 242
CHW 432 to 752
CHG 225, 280, 365
CHW 882, 1002
CHW 1152, 1252
MODELS: CHW 1452 to CHW 3652
MODELS A B
CHW 1452,
1525 3990
1802
CHW 2052 1525 3990
CHW 2552 1525 3990
CHW 2850,
1525 4990
3152
CHW 3652 1525 4990
4.

TRANSPORT/ PACKAGING/ STORAGE

4.1

REMOVING THE PACKAGING AND HANDLING THE CHILLER

Each chiller is supplied in a reinforced carton on a wooden pallet. The chiller must be kept in an upright
position at all times. NOTE: Tilting the chiller may cause serious damage! Procedure:
* Remove the strapping from the carton. Always wear safety gloves when using scissors
or other tools to cut the straps.
* Remove the carton.
* Raise the chiller using suitable lifting gear.
NOTE: If the chiller is fitted with eyebolts, these must be used for lifting it in accordance with the ap-
plicable safety standards.
If the chiller is not fitted with eyebolts, the lifting gear must be appropriate for the weight of the
chiller, as indicated on the identification plate and in the Annex.
* Remove the pallet (if present).
* Place the chiller in the desired location.
* Remove the operating manual, accessories and key from the chiller.
A B H
1325 760 1525
1325 760 1525
1325 1520 1525
1325 2280 1525
1325 3040 1525
H C D E
100
2170 2060 381
2170 2060 381 100
2170 2060 381 100
100
2170 2060 381
2170 2060 381 100
C D E F
1400 300 300 603
1400 300 300 603
1400 300 300 603
1400 300 300 603
1400 300 300 603
F G I L
/ / 200 310
/ / 200 310
/ / 200 310
/ / 200 310
/ / 200 310
11
22/07/2009
G I L M (Ø)
300 / 84 / 1"
300 / 84 / 2"
300 / 84 / 1½"
300 / 84 / 1½"
300 / 84 / 2"
M (Ø)
/ 3"
/ 3"
/ 3"
/ 3"
/ 3"