LiftMaster 8587W Manual Del Usuario página 32

Operation
Using the Smart Control Panel®*
SETUP
The features on the door control can be programmed through a series of menus on the screen and
the navigation buttons. Refer to the descriptions below.
SCREEN
The main screen displays the time, temperature, and current battery charge (if applicable).
Navigation Buttons
FEATURES
Press the navigation button below "MENU" to view the Features menu.
*If applicable
Set the time, choose 12 or 24 hour clock and show/hide clock.
For sectional doors ONLY. Set the Timer-to-Close feature off/on
and set the time interval before door closes. NOTE: DO NOT
enable TTC if operating a one-piece door. TTC is to be used
ONLY with sectional doors.
Enable/disable lock.
Set up Wi-Fi*, add remote controls, myQ ® devices, an extra
remote button to control your garage door opener lights, or a
keyless entry.
* The garage door opener must run through a complete cycle
before it will activate Wi-Fi ® programming.
SETTINGS
Press the navigation button below the down arrow till you see TEMPERATURE to view the Settings
menu.
SERVICE
Press and hold the LIGHT button, then press the second navigation button to view the Service menu.
32
Display the temperature in Fahrenheit or Celsius and
show/hide the temperature.
Select a language.
Set duration for garage door opener light to stay on after
operation, selectable range of 1-1/2 to 4-1/2 minutes. Turn the
Motion sensor off/on, and turn the entry light feature off/on.
Adjust the contrast of the screen.
Displays software version information.
Turn the Maintenance Alert (MAS) on/off.
Displays the number of remote controls, myQ ® devices,
door controls and keyless entries currently programmed
to operate the garage door opener.
Displays any errors that have occurred.