Remote Control - Mikropor Mia Air Manual De Usuario

REMOTE CONTROL

The Mia Air mobile application allows you to control your air purifier from anywhere around the world.
Depending on the properties of your smart phone and service parameters some functions may not be
supported. The Mia Air mobile application is suitable for the following devices:
• ANDROID (ICS 4.12 Jellybean or higher versions)
• iOS (6.0 or higher versions - iPhone 4S or later)
Before connecting the Mia Air mobile application:
A Wi-Fi router must be installed in range of the device for the Mia Air mobile application to be used.
Wi-Fi router properties:
2,4 GHz Wi-Fi (Network security; on, WEP, WPA and WPA2)
Compatible with 802. 1 1 b / g / n router on the network band.
Ensure that you have an available Wi-Fi password.
During installation, the air purifier, the wireless router and the mobile device must be 10 meters close to each
other. A weak connection between the air purifier, the wireless router and the mobile device may prevent
installation. Before connection, the Smart Network Connection must be temporarily deactivated. It may be
activated after connection is completed.
Main Screen: It is the screen that all data transmitted over the Internet is viewed and the device is remotely
controlled.
List of Devices
Area that devices added to the application
are listed, and device selection is made.
The application allows access to multiple
devices.
Add New Device
The screen used to add new devices.
Mode Buttons
Control buttons which could be used to
switch between modes.
Sensor Indicators
Area showing sensor data and filter
8
Settings
Screen which device' s options are set.
Power Button
Button used to switch the device on and off.
Fan Level Indicator
Screen which shows the fan level according to
the mode that device is operating on.
Fan Status Indicator
When the filter needs to be replaced, the
filter status bar changes into an order
button.