New Device Adding Screen - Mikropor Mia Air Manual De Usuario

NEW DEVICE ADDING SCREEN

1. Screen
New device adding process needs to be for one time
to be able to connect your device to the Internet.
When your device is switched on, an access point
called mikropor_air_XXXXXXX broadcasts for three
minutes. Once you have connected to this access
point with your mobile device, it will automatically
switch to the settings screen.
Device Name
It comes up automatically when the device is connected, and it can be updated.
Back Button
When clicked, it opens the device page.
SID and Password
The wireless network required for your device to send data over the Internet.
2. Screen
The screen that the device is set in installation mode.
When you connect to your device' s Wi-Fi network,
this screen enables you to connect your device to
your mobile application. Device information setting
is managed on this screen.
Choose Wi-Fi – Wi-Fi Password
Mia automatically scans active Internet connections and puts the strongest
connection at the top of the list. The password for the wi-fi network that Mia will
be connected must be entered here.
Device Serial
The area in which the serial number is entered by the user. It must be in
Pxxxxxxxxxxx format and the same character length. The serial number sticker is
placed on the device.
Privacy Policy Checkbox
It is the permission box needs to be checked so that the device can send data
over the Internet.
Next-Taste
The button that enables you to move on to the next screen after completion of
the settings.
9