Replacing The Active Carbon And Hepa Filter - Mikropor Mia Air Manual De Usuario

• Open the air intake lids and observe the filter condition. If there is a thick layer of dust on the front filters that
means the filters are full. (1a)
• Wash and dry the front filter. (2a)
• Clean the inner area where the front filters fit in with a dry cloth and replace the cleaned filter. (3a)
• Ensure that the filter is undamaged and dry before replacing it.
1a 2a 3a

REPLACING THE ACTIVE CARBON AND HEPA FILTER

Unplug your device before replacing the filter.
• The filter must be replaced when the replace filter indicator light is illuminated. The duration of the filters
depends on the frequency of use and the level of dirtiness in the area where the product is being used.
• Open the air intake caps. If the front filter is dirty, clean and replace it.
• Remove the filled HEPA filter and replace with a new filter. Make sure the filter is undamaged and dry before
replacing it.
• When changing the filters use personal protective equipment such as gloves and masks. Used filters may
contain hazardous materials and particles. If used inappropriately they may disperse into the environment
and cause illness and health risks.
• Do not forget that filters must not be disposed of with household waste. Unusable filters must always be
disposed of in a correct and safe manner!
•
www.mia-air.com mia@mia-air.com
www.mikropor.com