Display; Air Quality Indicator - Mikropor Mia Air Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
Manual Function: Fan control is performed by the user. There are six different speeds where air volume can
change manually. The device can be changed to manual function by pressing the "mode" button. Press the
up arrow button on the right to increase the speed and press the down arrow button on the left to decrease
the speed.
Filter Change Indicator: The indicator light turns on when it is time for the filter to be changed.
After the filter replacement, reset is provided from Mia Air mobile application.
Carbon Filter Change Indicator: The indicator light turns on when it is time for the filter to be
changed. After the filter replacement, reset is provided from Mia Air mobile application. (Optional)
UV Light: It keeps the minimum level by working in specified intervals by killing microorganisms
that can cause disease in the air. The indicator light turns on when the UV light is operating.
(Optional)
UV rays are dangerous for eyes and skin.
Wi-Fi display: White light turns on when the device is connected to the internet. If the device is
not connected to the internet, the red light is on.

DISPLAY

The display value can be changed with the up arrow button on the right in other positions except for the
manual function. There are 3 different display positions.
AQI
:
Indicates the air pollution in the environment, air quality index.
VOC
:
Shows the VOC value in the environment in ppbx10.
PM2.5 :
Shows the PM2.5 value in the environment as µ g/m³.
The device indicator shows at which stage during the position change while in manual function. When the
position change is over, the position value (pm2.5 or VOC) continues to be shown.
Key lock is activated by holding down the down arrow key for 5 seconds and all keys are locked.
In order to unlock the key, it must be held down for 5 seconds without releasing the down arrow key.

Air Quality Indicator:

How to Disable the UV Lamp
The UV lamp gets turned off in between 35% to 50%.
The UV lamp can be controlled automatically by a card when it is not
charged somewhere within this range.
It shows the air quality in the environment.
7

Publicidad

Tabla de contenido
loading

Productos relacionados para Mikropor Mia Air

Tabla de contenido