Tabla de contenido
Publicidad
5. Pry the wiper arm linkage off the motor drive shaft.
5. Pry the wiper arm linkage off the motor drive shaft.
6. Disconnect the electrical connector.
6. Disconnect the electrical connector.
7. Remove the bolts and nut.
7. Remove the bolts and nut.
Notice : Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to
prevent premature corrosion.
8. Installation should follow the removal procedure in the reverse order.
8. Installation should follow the removal procedure in the reverse order.
Publicidad
Tabla de contenido
