Tabla de contenido
Publicidad
4. Remove the bearing plate bolts and the bearing plate, with the shafts attached. Do not disassemble the shafts.
4. Remove the bearing plate bolts and the bearing plate, with the shafts attached. Do not disassemble the shafts.
Installation Notice
Tightening Torque
5. Remove the differential from the transaxle housing. Do not disassemble the differential. Refer to
5. Remove the differential from the transaxle housing. Do not disassemble the differential. Refer to
"Differential"
"Differential"
in this section.
in this section.
6. Remove the backup lamp switch from the transaxle housing.
6. Remove the backup lamp switch from the transaxle housing.
Installation Notice
Tightening Torque
22 N•m (16 lb-ft)
20 N•m (15 lb-ft)
Publicidad
Tabla de contenido
