Harbor Breeze E-LUK52HBB5LEDR Manual De Instrucciones página 10

WIRING
[NOTE: For each wire connection below, and use
1.
one of the wire connectors (CC), making sure to
screw wire connector (CC) on in a clockwise
direction.]
Connect BLACK wire from fan to BLACK wire
from ceiling. Connect WHITE wire from fan to
WHITE wire from ceiling. Connect all GROUND
(GREEN) wires together from fan (on downrod and
mounting bracket) to BARE/GREEN wire from
ceiling.
NOTE: Black wire is hot power for fan. White
wire is common for fan and light kit. Green or
bare wire is ground.
Wrap electrical tape (not included) around each
2.
individual wire connector (CC) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of
box from the black connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (CC) into outlet box.
Hardware Used
CC
E3 Wire Connector
IMPORTANT: Using a full range dimmer switch to
3.
control fan speed will cause a loud humming noise
from fan. To reduce the risk of fire or electrical shock,
do NOT use a full range dimmer switch to control fan
speed.
1
120 V Power
FROM
CEILING
FAN
GREEN
2
CC
CC
x4
3
Dimmer
Switch
For illustrative purposes only--not
intended to cover all types of controls
10
BLACK
WHITE
GROUND/GREEN (BARE)
WHITE
GREEN
BLACK
WHITE
FROM FAN
Speed
Switch
Lowes.com/harborbreeze
CC
CC
CC
CC
3
2
1