The Meter Structure; The Meter Front Structure; Functional Buttons - ADInstruments AD233 Manual De Usuario

Modelo AD233: MANUAL DE USUARIO
Conforms to Standards of European Union

The Meter Structure

(see figure 1)
A.

The Meter Front Structure

21 Transformer Jaw: designed to pick up the AC and DC current flowing through the conductor. It could transfer current to voltage. The tested conductor must vertically go
through the Jaw center.
22 Hand Guards: to protect user's hand from touching the dangerous area.
23 Power button
24 Max/▲ button
25 MENU button
26 LOAD button (recall data)
27 SELECT button (pres to select alternate function and sum of Watts measurement)
28 MIN/▼ button
29 V3 Input Terminal (Third Phase measurement)
30 V2 Input Terminal (Second Phase measurement)
31 V1 Input Terminal (First Phase measurement)
32 COM Input Terminal
33 CLEAR button
34
∑ button (Sum)
35 SAVE button (data store button)
36 USB button
37 LIGHT button (auto display backlight button)
38 HOLD button
39 LCD Display
40 Testing Leads (Red, Black, Blue and Yellow)
B. The Meter Back and Bottom Structure
, Infrared slot
1
, USB Interface Cable
2

Functional Buttons

Below table indicated for information about the functional button operations.
Button
POWER Press and hold POWER for 1 second to turn the Meter on.
Press POWER again to turn the Meter off.
(see figure 1)
(see figure 2)
Operation Performed
21