Switching The Operation Mode; Using The Light Dimming Function; Switching The Display Mode - Philips 2000 Serie Manual Del Usuario

Note
•
When the target humidity level is
reached, the wick wheel will stop
rotating. It will start rotating again
when the humidity drops below the
target level.
•
If you want to increase the humidity
level quickly, you can select a
higher fan speed.
Switching the operation
mode
The appliance has two operation
modes, the purification ONLY mode and
the 2-in-1 mode.
1
Touch the mode selection button
to switch to the purification ONLY
mode (fig. t).
» displays on the screen when
the appliance operates in the
purification ONLY mode.
2
Touch the mode selection button
again to switch to the 2-in-1 mode
(fig. u).
» displays on the screen when
the appliance operates in the
2-in-1 mode.
» The current humidity level
displays on the screen by
default.
Note
•
The screen will display humidity
level for 3 seonds and change to
display the highest level of IAI or
PM2.5 if one of which is not good.
EN
10
Using the light dimming
function
With the light dimming button, you can
switch on or off the air quality light,
the display screen and the function
indicator if desired.
1
Touch the light dimming button
once, the air quality light will be
dimmed.
2
Touch the light dimming button
again, the air quality light and the
display panel will be turned off.
3
Touch the light dimming button
for the third time, all lights will be on
again.

Switching the display mode

The appliance has three display modes,
PM2.5 display, IAI display and humidity
level display.
Note
•
The appliance operates in IAI
display mode by default.
1
Touch and hold
switch to PM2.5 display (fig. v).
» PM2.5 indicator and the actual
PM2.5 level display on the screen.
2
Touch and hold
twice to switch to actual humidity
level display (fig. w).
3
Touch and hold
switch to IAI display (fig. x).
» IAI indicator and the actual IAI
level display on the screen.
Note
•
The screen will display humidity
level for 3 seonds and change to
display the highest level of IAI or
PM2.5 if one of which is not good.
for 3 seconds to
for 3 seconds
for 3 seconds to