Phasak PH 9280 Manual De Uso página 66

3. Operations
EN
14: Charger voltage adjustment
Interface
15: Inverter voltage adjustment
Interface
Interface
15: Output voltage calibration
65
PH 9280 | PH 9290
Uninterruptable Power Supply
Setting
Parameter 2: you may choose Add or Sub to adjust charger voltage
Parameter 3: the voltage range is from 0V to 9.9V, the default value is 0V.
NOTE:
*Before making voltage adjustment, be sure to disconnect all batteries first to get the
accurate charger voltage.
*We strongly suggest to use the default value (0). Any modification should be suitable
to battery specifications.
Setting
Parameter 2: you may choose Add or Sub to adjust inverter voltage
Parameter 3: the voltage range is from 0V to 9.9V, the default value is 0V.
Setting
Parameter 2: it always shows OP.V as output voltage.
Parameter 3: it shows the internal measurement value of the output voltage, and you
can calibrate it by pressing Up or Down according to the measurement from an
external voltage meter. The calibration result will be effective by pressing Enter. The
calibration range is limited within +/-9V. This function is normally used for parallel
operation.
Segurança e harmonia
ININTERRUPTA