CycleOps Pro Serie Guía De Usuario página 5

D
Handlebar post
H
Handlebar
7. Carefully slide the handlebar assembly
onto the handlebar post. Secure the
plastic end cap to the handlebar post
using two end cap screws with the
Phillips screwdriver side of the 6mm Allen
wrench.
Attach Seat
A seat has been included with the CycleOps Pro Series indoor cycle. If desired, the indoor cycle can accommodate an off-the-shelf
seat to personalize the fi t, feel and ride. In some instances, a shorter seat post clamp is required for individuals under fi ve feet tall.
If desired, contact Saris Cycling Group to purchase the short seat clamp.
Main frame
C
assembly
1. Remove 6mm bolt in main frame as-
sembly using 6mm Allen wrench. The
6mm bolt can be kept in place of the
large L handle for a more permanent
placement of the seat post height.
K
End cap
8. Once the handlebar is in place, secure it
with the small L handle on the right side
of the indoor cycle (chain guard side).
2. Insert seat post into the seat tube and
secure it by inserting the large L handle
into the main frame assembly on the
right side of the indoor cycle (chain
guard side).
O
Small L
handle
E
Seat post
Main frame
C
assembly
N
Large L
handle
N Small L
Large L
handles
handles
Push
9. Push black button and rotate handle on
small and large L handles to position the
handle without tightening. Release the
button and allow the handle to seat to
tighten or loosen an adjustment.
E
Seat post
3. Attach the seat post clamp to the seat
post. Once the seat is level, properly
tighten with the small L handle.
O
Rotate
G
Seat post
clamp
Small L
O
handle
4