CycleOps Pro Serie Guía De Usuario página 6

F
Seat
4. Attach seat to seat post clamp.
Level the Indoor Cycle
Move the indoor cycle to where it will be used and level it by rotating the adjustable feet underneath the stabilizers. Leveling
the indoor cycle helps ensure a stable and quiet ride and reduces wear on the frame. When adjusted properly, there is no rocking
movement from one foot to the other.
Leveler Feet
Rear stabilizer
Front stabilizer
1. If necessary, the four outer leveler
feet can be adjusted. Turn stabilizer feet
clockwise to lower the indoor cycle. Turn
stabilizer feet counterclockwise to raise
indoor cycle.
Seat
G
Seat post
clamp
5. Loosen the 6mm bolt and place seat rails
within the clamp. Adjust to desired seat
placement using 6mm Allen wrench.
Lock Nut
A
B
2. Secure the leveler feet by tightening
the lock nuts, with the multi-purpose
wrench, fl ush against the bottom of the
rear and/or front stabilizer.
F
G
Seat post
clamp
A
Rear stabilizer
B
Front stabilizer
E
Seat post
6. Secure the plastic end cap to the seat
post using two end cap screws with the
Phillips screwdriver side of the 6mm Allen
wrench.
K
End cap
5